Waterproofing of balconies and terraces with mineral based waterproofing systems

1 Concrete repair
KÖSTER Betomor Multi A
2 Self-levelling underlayment
KÖSTER Repair Mortar
3 Primer
KÖSTER Polysil TG 500
4 Waterproofing Layers
KÖSTER NB Elastic Grey
5 Reinforcement
KÖSTER Glass Fibre Mesh
6 Tile Adhesive
KÖSTER BD Flexible Tile Adhesive
7 Waterproofing wall / floor junctions
KÖSTER Glass Fibre Mesh

The mineral waterproofing of balconies and terraces is carried out with crack bridging KÖSTER NB Elastic (white or grey). This waterproofing is resistant to foot traffic and can be covered with tiles. It also bonds to damp substrates.

Before installing the waterproofing the substrate is hardened and prepared with the primer KÖSTER Polysil TG 500. Fillets are installed with KÖSTER Repair Mortar Plus. In the wall floor junction and all areas in danger of cracking KÖSTER Glass Fiber Mesh is embedded into the fresh first waterproofing layer.

Concrete repair work is done with KÖSTER Betomor Multi A. The concrete surface must be mechanically cleaned and a solid substrate achieved. Reinforcement steel has to be thoroughly cleaned from rust by sandblasting. In case of severe damage the reinforcement has to be strengthened.

Minor damages in the concrete surface can be levelled with KÖSTER C-Coat, and painting done with KÖSTER Silicone Paint White.

Always adhere to the specifications in the respective Technical Guidelines.



Albania Austria Bosnia and Herzegovina Brasil Bulgaria China Croatia Czech Republic Denmark Finland Germany Ghana Greece Hungary Italy Japan Kazakhstan Kuwait Latvia Lebanon Macedonia Mexico Netherlands New Zealand Norway Panama Poland Portugal Romania Russia Senegal Serbia Slovakia Slovenia South Africa Spain Thailand Turkey Ukraine United Kingdom United States of America